These are our automatic assembly lines. After the injection molding machine produces the parison , it is automatically transported by the conveyor belt to the front of the blow molding machine, Injection-blow moulding, a method of molding a bottom-closed parison by an injection molding machine, and then moving the parison into a blow molding die to blow compressed air to form a product. The product produced by this method is injection-molded, so the size is accurate, the precision is high, and it is not necessary to trim; the bottom has no blank, so the strength is good, and the bottle with excellent appearance can be obtained.and the robot automation assembly produces and packaging of the finished product; all the machinery and equipment are unified by the beat of operation, the production process is highly continuous.
These are our automatic assembly lines. After the injection molding machine produces the parison , it is automatically transported by the conveyor belt to the front of the blow molding machine, Injection-blow moulding, a method of molding a bottom-closed parison by an injection molding machine, and then moving the parison into a blow molding die to blow compressed air to form a product. The product produced by this method is injection-molded, so the size is accurate, the precision is high, and it is not necessary to trim; the bottom has no blank, so the strength is good, and the bottle with excellent appearance can be obtained.and the robot automation assembly produces and packaging of the finished product; all the machinery and equipment are unified by the beat of operation, the production process is highly continuous.
These are our automatic assembly lines. After the injection molding machine produces the parison , it is automatically transported by the conveyor belt to the front of the blow molding machine, Injection-blow moulding, a method of molding a bottom-closed parison by an injection molding machine, and then moving the parison into a blow molding die to blow compressed air to form a product. The product produced by this method is injection-molded, so the size is accurate, the precision is high, and it is not necessary to trim; the bottom has no blank, so the strength is good, and the bottle with excellent appearance can be obtained.and the robot automation assembly produces and packaging of the finished product; all the machinery and equipment are unified by the beat of operation, the production process is highly continuous.
the cap machine process are all injection-molded. There are One mold with four cavities , One mold with six cavities , One mold with eight cavities . the different number of cavities have different output. Normally One mold with eight cavities , the daily output can reach 20,000/day.
These are our automatic assembly lines. After the injection molding machine produces the preforms, it is automatically transported by the conveyor belt to the front of the blow molding machine, and the robot automation assembly produces and packaging of the finished product; the task of the worker is only to adjust, supervise and manage the automatic line. do not directly participate in the operation; all the machinery and equipment are unified by the beat of operation, the production process is highly continuous.
Automatic labeling machine1.Put the labeling rolling in the machine ,and set the machine to to right status2.Place the bottles one by one on a conveyor belt 3.The bottle will then follow the conveyor belt to the label area to complete the automatic labelingBottle preforms formingThe cap machine process are all injection-molded. There are One mold with four cavities , One mold with six cavities , One mold with eight cavities . the different number of cavities have different output. Normally One mold with eight cavities , the daily output can reach 20,000/day.If it have eight cavities ,that means it could produce eight pieces of Preforms at one time , the production efficiency has been greatly improved.The bottles preforms will be transmitted by the conveyor belt to blowing machine .The robot arm automatically grabs the bottle preforms, puts it in the conveying position of the machine, then transfers them to the bottle blowing machine, Complete blowing the bottles.PET Technological process1.Beating embryo2. Embryo release3. One step molding of PET bottle embryo bottle4. Blowing bottle
The finished bottle embryo will be passed to the bottle blowing machine through the conveyor belt, and then the bottle is formed in one step through the blow molding process.The bottles preforms machine process are all injection-molded. This moulding has eight cavities ,that means it could produce eight pieces of Preforms at one time , the production efficiency has been greatly improved.The bottles preforms will be transmitted by the conveyor belt to blowing machine .
